Mixers

Ultra MixMaster

The Ultra MixMaster is designed to provide high speeds, higher outlet pressure and higher capacity that the MixMaster.

The Ultra MixMaster is a very powerful ultra high shear mixer with a shear rate up to 120.000S-1.

The mixer works according to the rotor-stator principle, where a special closed mixing wheel passes the product through the patented stator. For some applications, the Ultra MixMaster can replace a low-pressure homogeniser. The Ultra MixMaster has a homogenising effect is equivalent to 50-80 Bar and can create homogenisation down to 1 my lump free.

The mixer unit is very versatile and can be used in many setups and applications. For low to medium viscosity the mixer preforms the out-pumping action itself. For high-viscose applications (>500cp) the setup requires positive feeding.

The UltraMaster has been optimised for mixing of a wide range of products, e.g.:

  • Batch operation – the mixer is placed in a circulation loop over a process vessel
  • Inline setup – the mixer is placed between to process vessels and operates in single pass

Applications

The Ultra MixMaster can be used for:

  • Emulsification
  • Reduction of droplet size
  • Shear of slurries
  • Concentrates
  • Pigments

For some applications, the mixer adds a light homogenisation

Standard Options

  • Mixer unit (230/400V 50Hz) with shaft sealing (to be frequency controlled)
  • Tri-clamp inlet/outlet
  • Motor Cover
  • Frame with 4 legs

Options

  • Double mechanical shaft seal with solenoid valve and throttle valve
  • Manual regulating seat valve to adjust outlet flow (unique SSV Ø51)
  • Bypass loop for extra recirculation over mixer
  • Fitting SMS DIN/ISO. Other on request
  • Other motors, NEMA & etc. on request.
  • Start/stop box with frequency inverter
  • Start/stop box with soft starter
  • ATEX
  • Alternative voltage – on request

Applications

The Ultra MixMaster can be used for:

  • Emulsification
  • Reduction of droplet size
  • Shear of slurries
  • Concentrates
  • Pigments

For some applications, the mixer adds a light homogenisation

Model Motor Flow Shear Rate Inlet pressure
Ultra MixMaster 32 – 250 18,5 kW 10-40 (5 Bar) m3/h Up to 120,000 s-1 0.5 – 5 Bar
Ultra MixMaster 32 – 250 22 kW 10-50 (5 Bar) m3/h Up to 120,000 s-1 0.5 – 5 Bar

 

Model Outlet pressure Service Water* Weight Dimensions (H x W x D)
Ultra MixMaster 32 – 250 2,5 – 7 Bar 20 L/h 210 kg 908 x 460 x 930 mm
Ultra MixMaster 32 – 250 2,5 – 7 Bar 20 L/h 225 kg 908 x 680 x 1150 mm

Data sheet

Download