Mixers

InjectMaster

The InjectMaster is the most energy-efficient solution on the market for inline high shear mixing. The special designed injector creates a strong suction of powder.

The InjectMaster is designed with an innovative injector which creates a strong suction of powder. The mixer works according to the rotor-stator principle, where a unique designed mixing wheel passes the product through patented slots.

During operation, the mixing wheel accelerates the liquid and creates pressure in the injector pipe, which draws the powder from the powder funnel. The amount of powder is controlled by a manual butterfly valve.

The mixer unit is versatile and can be used in many setups and applications. For low to medium viscosity the mixer performs the pumping action itself.

For high-viscose applications (>500 cP) the setup requires positive feeding. The mixer system can be integrated into a table that offers an ergonomic working position.

 

With the InjectMaster our customers will receive a mixer with:

  • Ergonomic working height
  • Low energy/high efficiency
  • Strong shear rate
  • Low service cost
  • Designed according to EHEDG
  • Step-file available on request

Applications

The InjectMaster can be used for various applications e.g.:

  • Powder and Liquids
  • Sugar Solutions
  • Recombined dairy products
  • Brine

Homogenisation down to 2 my lump free.

Standard Equipment

  • Mixer unit (230/400V 50Hz) with single shaft seal
  • Tri-clamp inlet/outlet

Options

  • Double mechanical shaft seal with solenoid valve and throttle valve
  • Powder automation – vibrator, level switch, actuator
  • Control cabinet with frequency inverter
  • Control cabinet with frequency inverter and powder automation
  • Fitting SMS DIN/ISO. Other on request
  • ATEX
  • Other motors, NEMA, etc. on request
  • Ergonomic working station

Applications

The InjectMaster can be used for various applications e.g.:

  • Powder and Liquids
  • Sugar Solutions
  • Recombined dairy products
  • Brine

Homogenisation down to 2 my lump free.

Model: Motor Flow Powder Capacity* Outlet pressure
InjectMaster 40-160 5.5 kW 25 m3/h 40 kg/min 2 Bar
InjectMaster 50-160 7.5 kW 40 m3/h 60 kg/min 2 Bar

*Powder capacity based on standard milk based powders

Model: Connection Service Water** Weight Dimensions (H x W x D) Funnel size
InjectMaster 40-160 IN 2” OUT 2” 20 l/h 110 kg 915 x 660 x 1100 mm 30l
InjectMaster 50-160 IN 2½” OUT 2½” 20 l/h 130 kg 915 x 660 x 1100 mm 30l

**When flushed, mechanical seal is selected

Data sheet

Download